Home
Home Products Technology Solutions Support News Contact
Products
IVIS (D)
IVIS (T)
IVCAM
IVInLine
IV3D
IVScanner
IVThermalEye

ics

You will need Acrobat Reader to read our brochures. Download for Free

acrobat

ICS offer bespoke vision systems, we can develop systems if a customer has a preferred design format. Read more......

Download this page
STEP-BY-STEP GUIDE TO CREATING A SURFACE  (With Extrusion)

 

icam

You will need Acrobat Reader to read our brochures. Download for Free

acrobat

 

STEP-BY-STEP GUIDE TO CREATING A SURFACE  (With Extrusion)

For example we are using a single image of a chair. This process will guide you through the creation of a 3D model.

Step 1

  • Select your Image (This image can be anything at all form a Drawing to a photograph).

  • Download the image onto your PC (making sure its in jpeg format).

  • Load up IVCam Handheld and Open you image.

Step 2

  • What you need to now is decide on what you need to measure (you need to chose what points you want to measure on the images that you have, these can be drawn on to you actual images using the “Add Polyline” tool and labelled also with “Front Dialogue”)

  • Chose which planes would be the best for the measurements of each line (you will be looking for the most direct image for each plane)

Step 3

  • Draw your lines onto the image (when drawing your lines onto the image you will need to make sure where the lines are placed, you may want to place markers at the points that want to be measured, before you take the picture).

  • Once your lines have been drawn, you can Label them (These labels that you add will be used in the final report)

Step 4

  • Check your lines and check that the points are in the correct places. Also that all the lines that you want to be in the report are correctly labelled.

  • Now to calibrate your image (At this point you need to calibrate your image and make sure that there is only 1 plane per image)

Step 5

  • Select Option “Create Report” and you will now have a report for all the details you have drawn and named (selection this option will take all the lines that have been named and measure them and place them in a report along with the images that you have used).

 

 

 

 

Top of the pageNext Page  |  Previous  |



chair2
Step 1

dimensions

Step2

chairs

Step 3

dimensions2

Step 4

reports

Step 5

    Email: info@ics-uk.net
   Telephone: +44 (0)1142 242522 Fax: +44 (0)1142 242222
   The Innovation Centre, 217 Portobello, Sheffield S1 4DP

The Federation of Small Businesses logo